USER & PARTS MANUAL
CS940
29
5.B.g
End of a stick
It is strictly forbidden to stack mouldings on top of the other during a cut.
Operator should never put his hands inside the cover, under the brush, risk of severe injuries!
IT IS STRICTLY FORBIDDEN TO MOVE DOWN BOTH
BLADES AT THE SAME TIME.
20
9
16
9
17
9
18
9
19
9
At the end of a moulding it is difficult to predict where the left clamp will be. In the example
opposite, the left clamp will push the moulding to the right blade, this can damage the
machine and the moulding. In that case you can move backwards the left clamp, if it is not
possible to avoid the contact between the moulding and the left clamp, then the moulding
has to be discarded.
DO NEVER MAKE A CUT IN THE SITUATION AS SHOWN IN THE PICTURE OPPOSITE.
Figure 5-20
A scale on the left arm allows you to measure approximatively the lengh of
the remaining moulding.
Figure 5-21
Summary of Contents for CS 940
