Non contractual document - Cassese France
®
- Document non contractuel
13
F) REMOVING THE SIDE PANEL
G) REMOVING THE WORKING TABLE WITH THE PEDAL
After the previous step,
rotate the pedal in its
axis and put it in vertical
position.
You can remove the
pedal of its axis by
pulling up.
Take the working table
and the pedal together to
exit the mechanical parts
from the frame.
Now, you can access to
the mechanical parts of
the machine.
To access more easily to the mechanical parts, you have to remove the side panel where
is located the sticker “Cassese France”. The following procedure is to be followed for
removing or replacing the side panel of the machine :
Unscrew the 4 screws of
the working table with
the Allen Key 3mm.
Next, shift to one side
the working table.
Take the side panel and
remove it by pulling up.
Inside view of the CS1
CART.
Summary of Contents for CS1 CART
