Cassida C-880 coin counter/sorter/wrapper
moving money forward
11
1.5 Specifications
up to 600 coins / min.
Counting speed
approx. 500 – 600 coins(with a coin diameter
of 21,5 mm and a coin thickness of 1,7 mm
4.3 inch TFT color screen
2xRS232, 1xUSB,1xExternal display
USB disk
630*310*424(with hooper:475) mm
ca. 30 kg
230V 50Hz or 115V 60Hz
60W
10 – 40°C
30 – 75%
Volume coin hopper
Display
Communication port
Upgrade
Dimensions (W*D*H)
Weight
Power supply
Power consumption
Ambient temperature
Ambient Humidity
When using this unit, basic safety precautions should always be observed, including the following:
•
Do not use this unit in areas where it may be exposed to water or any other liquids.
•
Only use the power cord supplied with the machine. Plug the power cord into a properly grounded
wall outlet. Do not remove the ground pin from the power cord. Failure to properly ground the
machine can result in severe injury or fire.
•
Make certain the unit is installed on a flat surface. Do not operate the machine in areas with high
temperature, humidity or smoke, as these conditions may prevent proper operation.
•
Do not start the unit when the rear access panel is open. Ensure no coins are in the hopper when the
machine is first turned on.
•
When not using the unit for an extended period of time, disconnect the power cord from the wall
outlet.
•
Unplug the unit from the wall outlet before cleaning. Use a damp cloth or specifically designed
maintenance accessories such as a Cassida air duster or soft bristle brush.
•
To avoid the risk of electrical shock, do not disassemble this unit. Disassembly will expose you to
1.6 Important safety notes
dangerous voltages and other safety risks. Incorrect reassembly can cause electrical shock when the
appliance is subsequently used.
Take the unit to a qualified technician when service or repair is required. Do not try to replace any
parts yourself.
2.
OPERATING
2.1 The main display
1
2
3
4
5
6
8
7
9
10
1. Currency
2. Count mode
3. Date and time
4.Total amount
2.2 User menu settings
At Main screen, long press SET button for 3 seconds, enter USER menu, enter any individual item
through pressing SET, press OK to save the settings, press CLEAR button to exit, each function setting
details as follows:
5. Total count
6. Currency symbol
7.Batch enable or disable
8. There is Data in memory
9. Operator Number
10. Reject Quantity
10
