OPERATION
TS--2700/TS--3300 (10--98)
15
TROUBLE SHOOTING
PROBLEM
CAUSE
SOLUTION
Machine does not operate.
Batteries need charging.
See CHARGING BATTERIES.
Faulty battery(s).
Replace battery(s).
Loose battery cable.
Tighten loose cable.
Improper battery connection.
See INSTALLING BATTERIES.
Faulty main power switch
Contact Service Center.
Main circuit breaker has tripped.
Determine cause and reset circuit
breaker button.
Faulty trigger switch.
Contact Service Center.
Brush motor does not operate.
Brush circuit breaker has tripped.
Clean or change to a less aggres-
sive pad. Also, release pad pres-
sure lever if it’s in the up position.
Reset breaker button.
Loose wire connection.
Contact Service Center.
Triggers not pulled.
Pull triggers to activate brushes.
Faulty brush motor or wiring.
Contact Service Center.
Worn carbon brushes.
Contact Service Center.
Faulty solenoid.
Contact Service Center.
Vacuum motor does not operate.
Vacuum circuit breaker has
tripped.
Remove obstruction and reset
breaker.
Faulty vacuum switch.
Contact Service Center.
Faulty wiring.
Contact Service Center.
Faulty vacuum motor.
Contact Service Center.
Faulty solenoid.
Contact Service Center.
Worn carbon brushes.
Contact Service Center.
Short run time.
Batteries not fully charged.
Charge batteries.
Bad cell in one or more batteries.
Replace battery.
Batteries need maintenance.
See BATTERY MAINTENANCE.
Faulty charger.
Replace battery charger.
Poor squeegee pick up.
Full recovery tank.
Empty recovery tank.
Clogged float shutoff screen.
Remove screen and clean.
Clogged squeegee.
Clean squeegee.
Worn squeegee blades.
Replace squeegee blades.
Loose squeegee thumbscrews.
Tighten thumbscrews.
Loose vacuum hose connections
or hole in hose.
Push hose cuffs firmly on connec-
tions. Replace hose if damaged.
Clogged vacuum hose.
Remove clogged debris.
Worn recovery tank lid gasket.
Replace gasket.
