background image

CBV734W Series VoIP Cable Modem  
User’s Manual

 

 

Canada-Industry Canada (IC) 

Operation is subject to the following two conditions:  
 
this device may not cause interference and  
this  device  must  accept  any  interference,  including  interference  that  may  cause 
undesired operation of the device. 

 

IMPORTANT NOTE: 

IC Radiation Exposure Statement: 
This  equipment  with  IC  radiation  exposure  limits  set  forth  for  an  uncontrolled 
environment. To maintain compliance with IC RF exposure compliance requirements, 
please follow operation instruction as documented in this manual. 

 

Warranty  

Items  sold  by  manufacturer/distributor/agent,  hereinafter  called  "Seller",  are 
warranted only as follows: Except as noted below Seller will correct, either by 
repair  or  replacement  at  its  option,  any  defect  of  material  or  workmanship 
which develops within one year after delivery of the item to the original Buyer 
provided  that  evaluation  and  inspection  by  Seller  discloses  that  such  defect 
developed  under  normal  and  proper  use.  Repaired  or  replaced  items  will  be 
further  warranted  for  the  unexpired  term  of  their  original  warranty.  All  items 
claimed defective must be returned to Seller, transportation charges prepaid, 
and  will  be  returned  to  the  Buyer  with  transportation  charges  collect  unless 
evaluation  proves  the  item  to  be  defective  and  that  the  Seller  is  responsible 
for  the  defect.  In  that  case,  Seller  will  return  to  Buyer  with  transportation 
charge prepaid. Seller may elect to evaluate and repair defective items at the 
Buyer's  site.  Seller  may  charge  Buyer  a  fee  (including  travel  expenses,  if 
needed) to cover the cost of evaluation if the evaluation shows that the items 
are not defective or that they are defective for reasons beyond the scope of 
this warranty. 
 
The  Seller  makes  no  warranty  concerning  components  or  accessories  not 
manufactured by it. However, in the event of failure of such a part, Seller will 
give  reasonable  assistance  to  Buyer  in  obtaining  from  the  manufacturer 
whatever adjustment is reasonable in light of the manufacturer's own warranty. 
Seller will not assume expense or liability for repairs made outside the factory 
by other than Seller's employees without Seller's written consent. 
 
SELLER  IS  NOT  RESPONSIBLE  FOR  DAMAGE  TO  ANY  ASSOCIATED 
EQUIPMENT,  NOR  WILL  SELLER  BE  HELD  LIABLE  FOR  INCIDENTAL, 
CONSEQUENTIAL,  OR  OTHER  DAMAGES.  THIS  WARRANTY  IS  IN  LIEU 
OF  ALL  OTHER  WARRANTIES  EXPRESSED  OR  IMPLIED  INCLUDING 
THE IMPLIED WARRANTY OF "MERCHANTABILITY" AND "FITNESS FOR 
PARTICULAR PURPOSE." 

 

Note to CATV Sysrem Installer 

"The EUT must be bonding the screen of the coaxial cable to the earth at the 
building entrance per ANSI/NFPA 70, the National Electrical Code (NEC), in 
particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial 
Cable.”

 

Trademarks 

All trademarks are the property of their respective owners. 

Summary of Contents for CBV383Z4S-N300






























Reviews: