4
Use instructions
1. Remove all packaging before use and dispose of safely.
2. Using a suitable screwdriver to remove the safety screw and open the battery compartment cover. Do not lose the screw.
3. Insert 3 x 1.5V AA (LR6) batteries following the proper direction indicated inside the battery compartment. Ensure the battery
polarity signs are followed.
4. Replace the battery compartment cover and the safety screw.
5. Press the button on the battery compartment and the light set should now be lit.
Functions and settings
Timer:
Set lights to automatically come on at the same time every day, 6 hours on/18 hours off. The light cannot be used without the
timer setting.
A
B
A
B
On / Off
1
Combination
5
Chasing / Flash
2
In Waves
6
Slow Fade
3
Sequential
7
Twinkle Flash
4
Slow-Glow
8
Steady On
With memory function
WARNING:
• This product is for use as a decoration only. Not to be used by children as a toy. Keep
out of reach of small children.
• This product has small parts, which may pose a choking hazard if detached.
• Keep away from fire and sources of heat.
• Do not allow water to come into contact with the batteries or wiring.
• The light source of this luminaire is not replaceable: when the light source reaches its
end of life the whole luminaire shall be replaced. DO NOT attempt to replace any of the
bulbs in the light set.
• Take care not to damage the cable or fittings.
• The external flexible cable or cord of this luminaire cannot be replaced. If part of the
light set of the cord is damaged, the luminaire MUST be destroyed.
• DO NOT pierce the cable when securing in place, bend or stand on the light chain, as
this will damage the bulbs or wiring.
SANT128-08 LED light strings (basic) BO GroupSF_NEW4a_R.indd 4
18/04/2019 16:41
