Cata BIF177, Instruction Manual

Refrigerator Diagram-- Preparation 

1. Shelves 

2. Vegetable and fruit tray 

3. Temperature Controller 

4. Egg tray                                     

5. Bottle racks

This diagram may vary slightly with the layout of the refrigerator you have

just purchased due to technical improvements. 

Preparation 
Unpacking 

Remove all packing materials. 

Check attachments and materials 

Checking should be conducted with reference to the Packing List. Contact the local 

distributor if discrepancies are found. 

Ensure proper location of the refrigerator. 

*

Make sure the refrigerator is kept upright during handling. If an inclination is required,   

it should not exceed 45 degrees. Otherwise the appliance may get damaged resulting   

not only in compromised refrigeration performance. 

*

To avoid product damage or personal injury, the refrigerator should be unpacked   

by two persons after it is located in a previously selected position. 

*

Before installation, make sure the refrigerator has no visible exterior damage. 

*

When handling the refrigerator, do not lift it by holding the worktop, to prevent   

any damage to the refrigerator. 

*

Do not start up a refrigerator that is damaged.

Clean the refrigerator before use. 

(See the following section “Cleaning”) 

Idle time 

After the refrigerator has been sited and cleaned, let it stand for more than 30 minutes 

before connecting the power source 

3