alternately with
If the display flashes
heat setting
This means that:
•
you have not placed a pan on the correct
cooking
zone or.
•
the pan you’re using is not suitable for induction
cooking or
.
•
the pan is too small or not properly centred on the
cooking zone.No heating takes place unless there
is
a suitable pan on the cooking zone. The display
will
automatically turn off after 1 minutes if no
suitable
pan is placed on it.
When you have finished cooking
1.
Touching the relevant zone select key(A) that you
wish to switch off.
2.
Press the slider regulating key(D) control to
“0” level,
3.
Beware of hot surfaces
“H” will show which cooking zone is hot to touch.
It will disappear when the surface has cooled
down to a safe temperature. It can also be used
as an energy saving function if you want to heat
further pans, use the hotplate that is still hot.
Using the Boost function
Actived the boost function
1.
2.
,the
Select the heating zone by touching the
zone select key (A).
Touching the boost control key(E)
zone
indicator show “P.” and the power
reach Max.
Cancel the Boost function
1.
2.
Touching the relevant zone select key(A) that you
wish to cancel.
Touching the slider regulating key(D) to cancel
the Boost function, then the cooking zone will
revert to level 9.
•
•
The function can work in any cooking zone.
The cooking zone returns to level 9 after 5
minutes.
Using Child Lock Function
•
You can lock the controls to prevent unintended use
(for example children accidentally turning the
cooking
zones on).
•
When the controls are locked, all the controls except
the OFF control are disabled.
To lock the controls
Touch the keylock control for 3 seconds. The timer
indicator will show “Lo “
To unlock the controls
1.Make sure the Induction hob is turned on.
Over-Temperature Protection
A temperature sensor equipped can monitor the
temperature inside the Induction hob. When an
excessive temperature is monitored, the Induction
hob will stop operation automatically.
Detection of Small Articles
When an unsuitable size or non-magnetic pan (e.g.
aluminium), or some other small item (e.g. knife,
fork, key) has been left on the hob, the hob
automatically go on to standby in 1 minute. The fan
will keep cooking down the induction hob for a
further 1 minute.
Auto Shutdown Protection
Auto shut down is a safety protection function for
your induction hob. It shut down automatically if
ever you forget to turn off your cooking. The default
working times for various power levels are shown in
the below table:
2.
Touch and hold the keylock control for a
while
3.
You can now start using your Induction hob.
When the hob is in the lock mode, all the
controls are disable except OFF , you can
always turn the hob off with the OFF control in
an emergency, but you shall unlock the hob
first in the next operation.
Power level
1~3
4~6
7~8
9
Default working
timer (min)
240
180
120
90
When the pot is removed, the induction hob
can stop heating immediately and the hob
automatically switch off after 2 minute.
People with a heart pace maker should
consult with their doctor before using this
unit.
Using the Timer
You can use the timer in two different ways:
•
You can use it as a minute minder. In this case,
the timer will not turn any cooking zone off
when
the set time is up.
•
You can set it to turn one cooking zone off after
the set time is up.
•
You can set the timer for up to 99 minutes.
Using the Timer as a Minute Minder
If you are not selecting any cooking zone
1.Make sure the cooktop is turned on.
Note: you can use the minute minder even if
you’re not selecting any cooking zone.
Summary of Contents for ISB 3002 BK
Page 19: ......
