EN
Warning:
This is a Class I appliance and MUST be earthed.
This appliance is supplied with a 3 core mains cable coloured as follows:
• Brown = L or Live
• Blue = N or Neutral
• Green and Yellow = E or Earth
SUCTION VERSION
If the hood is to be installed as a SUCTION hood, connect the plastic outlet piece supplied with
the hood (150mm diameter pipe for better performance and lower noise levels.
FILTERING VERSION (INTERNAL RE-CYCLING)
When there is no exhaust duct for venting out-door, you can use a carbon filter. The air is depu-
rate by the filter and put again in the surrounding.
The air is released in the room through a connecting pipe, which goes through the hanging
cupboard and us connected to the connecting ring supplied.
To use the appliance in this version, proceed as follows:
1. Open the grids
2. To proceed to change the charcoal filter, the screw has to be removed.
3. Reinstall the grids.
Install the hood in line with the instructions on the template.
For gas cooking appliances only: the minimum distance to the Hood must be at least 65 cm.
Summary of Contents for VALTO
