EN
FAQS
Problem
Cause / Solution
The lamps do not work
A change may be necessary, but first check that the
lamp is correctly positioned and that the contact is
correct. Remember that lamps are not covered by the
warranty. PLEASE CONTACT THE CUSTOMER HELP
LINE.
The motor works, but it seems to
have requested performance or ex-
traction capacity
The selected speed is too low / Select a higher speed.
Check the Metallic Filter (grease filter). If it has not
been washed recently, it may be clogged with grea-
se or dirt. Disassemble and wash it in hot water and
detergent, and let it dry before reassembling again.
Ensure that the air outlet tube has not been obstruc-
ted.
The hood works, but the smell of the
food persists.
If you are using the hood in recirculation mode, the
Active Carbon Filter must be replaced.
The hood does not work
Check that the hood is connected to power. Check
that the fuses or automatic have not jumped.
The hood still does not work
If, after having checked the points mentioned above,
your problem has not yet been solved, contact the
technical service or your distributor.
Summary of Contents for VALTO
