STEP 6
Parts Required:
Quantity
Part Description
1
Runcam Swift FPV Camera
or
HS1177 FPV Camera *
Not included and sold separately
*
2
HS1177 Camera Mount 'Backplate' Screws (Phillips head #2 x 3/8” long x stainless steel)
2
HS1177 Camera Mount Adjustment Screws (Phillips head #1 x 5/16” long x stainless steel)
2
HS1177 Camera Mount Adjustment Washers (#1 size x steel)
1
HS1177 to Swift conversion mount (3D Printed Plastic)
2
FPV Camera Mounting Plates (1.5mm CF)
Assembly Process:
The SuperLight was designed to interface with the Runcam Swift FPV camera. However, if you want to use a standard
HS1177 type FPV camera this is no problem! We include a special 'backplate' that can be installed onto the rear of
your HS1177 which will adapt it for proper mounting. When using an HS1177 you will utilize the fasteners detailed above
to install the backplate and mount the camera into the frame. The Runcam Swift
includes
fasteners which can be used
to install it into the frame. To install the backplate onto your HS117 remove the existing two screws which hold the rear
plate onto the camera. LEAVE THIS PLATE IN PLACE and then use the #2 x 3/8” long screws to affix the backplate onto
the camera. This backplate is designed to fit both top mount and bottom mount plugs.
Summary of Contents for Speed Addict SuperLight
