Catalyst Enterprises Inc.
Protocol Analyzer Projects
26
Sequential Trigger Mode
In the Sequential Trigger mode, triggering occurs whenever a specific sequence of
patterns are detected. The sequence is established by the order in which the triggering
patterns are defined.
To define a triggering sequence, check the
Define Sequential Trigger Mode
check
box.
Figure 16. Select Sequential Trigger Mode
Timer
The sequential triggering mode offers the option of triggering on a timer
or inserting a timer in the triggering sequence to delay detection of the
next pattern in the sequence. To insert a timer in the trigger list Double-
click
Timer
to open the timer definition dialog.
Enter the desired
Time Value
, choose the
Time Unit
and click
OK
.
Defining Patterns
The definition of patterns for the sequential trigger mode is identical to
the Pattern mode with the following exception:
In the sequential
triggering mode the definition dialogs for these triggering patterns enable
the setting, to count the number of occurrences. This allows the user to
specify the number of times that the pattern must occur before triggering
or proceeding in the trigger sequence.
Summary of Contents for AirCom UWB Analyzer
