CaterChef 688.213, Manual

EN

G

LIS

H

8. Close the door, the oven will turn back to Ready Mode. If press 

 button during setting process, 

the oven turn to Door Open Mode. 

The program that not saved will be lost. If there is program saved as memory procedure, press the 

related number button, the saved program will start. If no saved program, the buzzer will alarm when 

pressing number button and it will not work.

Note:

1. If the electricity is cut off, the saved program will not lost. 
2. If the program need to reset, just repeat the above steps. 
3. If press 

 at the last step, it will turn back to Door Open Mode. The setting will be no use.

12. Double Quantity cooking

1. Under ready state, press "

X2

" button and then press number buttons 0-9 in 5 seconds, the oven will 

start cooking with the quantity preset cooking time.

2. Press "

X2

", "

DOUBLE

" displays. When press number buttons, LED will display the quantity preset time. 

For example, number button "

5

" and its preset time is 1 minute. Then press "

X2

", then time will change 

to 1:00*(1+0.8)=1:48 

3. When cooking program finish, the oven will enter End of Cook Cycle Mode. 

13. Stage Cooking Programming 

1. This allows the user to cook food items at combination of various Power Levels.
2. Three stages can be set at most under cooking mode or memory mode. After setting the power and time 

for the first stage, press 

 to set the second stage. And the same step to set the third stage.

3. When setting the second or the third stage, press 

, "

STAGE-2

" or "

STAGE-3

" displays.

4. Press 

 button to start cooking.

14. Use Option Mode 

1. Open the oven door and press "

2

" for 5 seconds. The buzzer sounds once and enter this mode. 

2. LED displays "

OP:

−−

".

3. Press any number button to enter related mode setting. For example: to set the voice of the buzzer to 

medium. Press "

2

", "

OP:22

" displays. If you want to change, keep pressing "

2

",  

LED displays "

OP:20

", "

OP:21

", "

OP:22

", "

OP:23

", "

OP:20

" .....in cycle. 

4. Press 

 to save the current setting. After saved, "

OP:

−−

" display again. 

5. During setting process, press 

 to enter Door Open Mode. Close the door will enter Ready 

Mode.

6. If 

 button not pressed at the last step, the program cannot be saved but stay at previous way.

15. Service Mode 

7. Open the oven door and press "

3

" for 5 seconds to enter service mode. 

8. LED displays "

SERVICE

".

9. To check the times of closing or opening the door, just press number button "

3

",  

LED will display the times.

10. Press number button "

4

" in, "

4-CLEAR

" displays. Press 

 and "

CLEARED

" displays,  

the message will be cancelled. 

11. Press 

 to enter Door Open Mode. Close the door will enter Ready Mode.

16. Factory-default setting

1. In power up and ready mode, press 

 and "

0

" to factory - default setting. 

688213 G20NEF

 25