29
7.
Control
7.1.
Remote controller
7.1.1.
Standard remote controller
The remote controller is used to control the Product (change the speed,
position of the seat, switch to different driving modes), as well as to
control the battery charge level. The remote controller consists of a
keypad, LED display and joystick. The remote controller is used to control
the power wheelchair.
1
— Chair down button;
2
— Chair up button;
3
— "On tracks" mode;
4
— Additional functions button Fn;
5
— On/Off button;
6
— Horn button;
7
— "On wheels" mode;
8
— Max speed down button;
9
— Max speed up button;
10
— Max speed level LED indicator;
11
— Battery charge LED indicator;
12
— Mode indicator «On Tracks»;
13
— Mode indicator «On Wheels»;
14
— Joystick;
15
— Emergency stop button
•
Chair up and down buttons
Moves chair up or down in "On wheel" mode for adjusting chair
angle
• Driving mode buttons
Switch the wheelchair to "On Tracks" or "On Wheels" mode.
• Additional functions button Fn
Provide additional functions in combination with other buttons.
Fn + horn button
—
disable / enable keypress sound.
Fn + speed up and down buttons
—
increases and decreases
joystick sensitivity. Thus, you can choose a more relaxed style of
movement of the wheelchair: with smooth turns, acceleration
and smooth braking; or more dynamic: with sharp turns,
acceleration and hard braking.
Fn + chair up and down buttons
– switches the operating modes
of the headlights (if available). Only 3 modes: no headlights,
running lights and low beam.
• On/Off button
The on/off key is used for switching on/off the power wheelchair.
• Horn button
The horn will sound as long as the horn key is being pressed.
Fig. 7.1.
Standard remote controller:
