33
Movement type selection menu
After turning on the wheelchair equipped with a remote control with an
LCD display, it will open the "Movement type selection menu"
(see fig. 7.3).
In this menu, you can select the type of travel between tracks and
wheels, as well as a rear-wheel drive mode for the GTS 4WD.
The select of the mode is carried out by the buttons «Down» 4 and «Up»
5 (fig. 7.2). For GTS 4WD, you will need to confirm your selection.
If you do not select the movement type and press "next" or "back" (for
the remote control from 4WD), you will go to the main screen (fig. 7.4),
the wheelchair will move only in "Manual mode".
You can return to the "Movement type selection menu" by pressing the
"Mode" button (Fig. 7.3).
Fig. 7.3.
LCD mode selection
Main screen
The main screen (Fig. 7.4) displays: travel speed 1, mileage (total 2 and
resettable 3), engine load 4, remaining battery charge 5, approximate
remaining travel on this charge 6, selected travel mode 7, logotype 8,
temperature 9 and headlight 10.
From this screen you can go to the mode of movement type selection
"Mode" 11 and "Menu" 12.
Fig. 7.4.
LCD main screen
The buttons "Down" 4 and "Up" 5 (see Fig. 7.2) in this menu allow you to
adjust the maximum speed of movement of the wheelchair 13 and
highlight the selected maximum speed in red.
