8
After each emergency stop, turn off and turn on the
Product
control
device. In case of errors, the system informs with a light code (see 11,
table 6) or shows a fault message on the display, stopping the execution
of uncontrolled functions. If, after restarting the control system, the
Product
displays an error again, the user can unlock the electromagnetic
brakes of the wheelchair to transfer it in pushing mode (by attendant
person). If it is not possible to ensure the movement of the wheelchair
by muscular strength, or to ask for help from others, the Product can be
controlled in "manual mode" (the control system must not be de-
energized). Driving in "manual mode" ignores the sensor values and
allows you to reach your destination, despite the blocking of the motors.
However, certain faults may damage the
Product
.
Evaluate the risks and
use this mode only in situations where no alternative solutions to
problems. After the appearance of such faults, contact the
Manufacturer
for specialist consultation.
Risk of accident or injury due to incorrect lifting of the wheelchair.
Attendant persons should only lift the wheelchair using special handles
(fig. 2.1) or the front frame beam. Do not lift the wheelchair by the
footrest or armrest!
Fig. 2.1.
Handles for transport
