9
Risk of injury if the wheelchair overturning while driving.
The
Product
can overcome slopes with an angle less than 15° (24 %) in
the "On wheels" mode (see fig. 2.5). Moving at angle of more than 15°
(24 %) is not allowed!
The
Product
is equipped with a track platform for climbing stairs with
angle of up to 35°, maximum step height — 180 mm. The
Product
is not
intended for use on spiral stairs.
Risk of accidents due to the
Product
overturning while in movement.
When the
Product
moves slope, the speed should be reduced (for
example, put into 1st gear). On descent and climbs, it is forbidden to
overcome obstacles, leave and sit in a chair. Overcoming obstacles,
descents and climbs is allowed only with the vertical position of the
backrest.
Overcoming obstacles such as steps and curbs is possible only on tracks.
In this case, the obstacle should be perpendicular to the direction of
movement.
The movement on the stairs can be performed only by orienting the
Product in front of the descent (fig. 2.6)
. Descending the stairs only
forward. Climb stairs only backwards. In "on tracks" mode, the system
will automatically maintain the horizontal position of the chair by tilting
it back.
Driving on ramps on wheels is possible only at an inclination angle of
no more than 15 degrees. If this angle is exceeded, the wheelchair
should be moved on the tracks with its back to the incline.
For stability
when lifting, you can tilt the chair position within 14 degrees.
