20
4.2.
Start of operation
Before using the Product, it is necessary to check the presence of all
items included in the standard set (see fig. 4.1, 4.2), estimate their
functional readiness and serviceability.
Before turning on the wheelchair, you must turn on the automatic switch
(fig. 4.3). The automatic switch turns off the wheelchair in case of short
circuit of overload. To turn on the wheelchair, you must turn the
automatic switch to the working position.
Make sure the emergency stop button is pressed (see fig. 7.1). If the
button is off, press it to activate the power of the wheelchair. Press the
power button on the remote control.
The wheelchair is ready for use in one second. The wheelchair is in safe
mode after starting until the drive mode is not selected ("on wheels" or
"on tracks").
Fig. 4.3.
Automatic switch
