32
7.1.2
Remote controller with LCD display
Remote controller with LCD display designed to improve the usability of
the Caterwil GTS wheelchair. The display shows a large amount of
information and allows you to comfortably operate a large number of
functions. The remote control with LCD display is analogous to the
dashboard of cars.
The remote control displays information about the current speed, load
on each engine, the remaining charge in percent and kilometers,
wheelchair mileage, ambient temperature, atmospheric pressure, time,
roll and pitch (lateral and longitudinal tilt angle) of the wheelchair and
much more. The remote control has language support. From the remote
control, you can adjust the sensitivity of the joystick, the mode of
operation of the headlights, the tone of the signal and the time.
1
— On/Off button;
2
— Left select button;
3
— Right select button;
4
— Down button;
5
— Up button;
6
— Headlight mode
switch button;
7
— Horn button;
8
— Display;
9
— Joystick;
10
— Emergency stop
button
Left select and right select
buttons are synchronized
with the legend on the
display.
The select right button
will perform the action
indicated in the lower right corner of the display (if there is), and the
select left button will respectively perform the action indicated in the
lower left corner of the display.
Fig. 7.2.
Remote control with LCD display:
