3
3
9
(Press and hold)
MODE
Starting/stopping measurement
Measurement starts automatically when the
bicycle moves.
During measurement the measurement unit
(
km/h
or
mph
) flashes.
Resetting data
Pressing and holding the
MODE
button when on the measurement
screen resets all measurement data to 0 (excluding
Odo
).
Power-saving function
If the computer does not receive
any signal for 10 minutes, the
power-saving screen is activated
and only the clock is displayed.
If
MODE
is pressed or a sensor
signal is received while the pow-
ersaving screen is activated, the
computer returns to the measure-
ment screen.
* If the computer is left on the
power-saving screen for 1 hour,
SLEEP
is displayed. When the
computer is in this state, you can
return to the measurement screen
by pressing the
MODE
button.
Starting measurement
[Measurement screen]
MODE
Measurement
starts
Measurement
stops
1 hour
10 minutes
Sleep
Power-saving
screen
Measurement
screen
