QUICK GUIDE
This is a quick guide to get you started. For
full details refer to the instruction booklet
or the website www.catler.eu
CUSTOM SET PROGRAMMING
1. Place your cup underneath the group head.
2. To begin programming, press the ‘program’ button
once. The machine will beep once and the program
button surround will begin to fl ash. This indicates the
machine is in programming mode.
3. Press the one (
) or two cup (
) button once.
The machine will commence normal pour function,
and the one or two cup button surround will begin to
fl ash.
4. When the desired amount of espresso has poured into
the cup, press the one or two cup button to stop the
pour. The machine will beep twice, indicating it has
saved and exited programming mode.
RESETTING DEFALT VOLUMES
To reset the machine to the default one and two cup pour
quantities: press and hold the program button, until the
machine beeps three times, then release the button. This
indicates the machine has returned to its original default
settings.
NOTE: Default settings; one cup pour is approximately
30 ml. Two cups is approximately 60 ml.
CARE AND CLEANING
We recommend following these regular cleaning and
maintenance steps after each use, to ensure your
machine continues to deliver quality espresso.
1. Rinse water through group head.
2. Purge steam through steam wand.
3. Always wipe the steam wand clean, immediately after
use.
4. Empty the drip tray and rinse.
5. Rinse fi lter basket and fi lter holder directly after use.
