INSTALLATION GUIDE
8
Rev. 0/ 14-07-2020
Each meter installed within a building must be located in a ventilated place and not less than 3 feet
from any source of ignition or any source of heat which might damage the meter.
The Gas Meter is rated for the following operating and storage temperature ranges. Use of the meter outside
of the listed temperature ranges is not recommended.
Operating ranges:
-
Measurement -22° F (-30° C) to +131° F (55° C)
-
Valve -13° F (-25° C) to +131° F (55° C)
Storage range:
-
-40° F (-40° C) to +158° F (70° C)
Direct customer inquiries as to the selection and application of gas meters to your local Cavagna Group sales
representative or Cavagna Group Support.
Cavagna Group does not endorse or warrant the completeness or accuracy of any third-party meter
installation procedures or practices, unless otherwise provided in writing by Cavagna Group.
Follow your company's standard operating procedures regarding the use of personal protection
equipment (PPE).
Adhere to guidelines issued by your company in addition to those given in this document when
installing or providing maintenance to the meters.
This product, as of the date of manufacture, is designed and tested to conform to all governmental
and industry safety standards as they may apply to the manufacturer.
The purchaser and user of this product must comply with all fire control, building codes, and other
safety regulations governing the application, installation, operation, and general use of this meter to
avoid leaking gas hazards resulting from improper installation, start-up, or use of this product.
To ensure safe and efficient operation of this product, Cavagna Group strongly recommends
installation by a qualified professional.
Comentado [GA3]:
To be verified with UL
