Control Panel Layout and Buttons Configurations:
Power
Decrease Value
Light
Increase Value
Blower Power Indicator
Blower Speed Indicator
Power-On Elapsed Digital Timer
Power-Off Delay Digital Timer
Power-Off Delay Timer Indicator
Light Power Indicator
Range Hood Operations
Page 12
This range hood is designed to remove smoke, cooking vapors and odors from the cook top area. For best results,
start the range hood before cooking and allow it to operate several minutes after the cooking is completed to clear
all smoke and odors from the kitchen.
Button functions:
•
Power: Power ON/OFF the range hood and activate power-off delay timer.
•
Decrease Value: Blower (motor) speed decrease, timer value decrease, and enter timer mode.
•
Increase Value: Blower (motor) speed increase timer value increase, and cumulative timer reset.
•
Blower Power Indicator: Lights up when blower (motor) is running.
•
Blower Speed Indicator: Shows current blower (motor) speed (1-6).
•
Light Power Indicator: Lights up when lights turned on.
•
Light: Turns ON/OFF and dim halogen lights.
•
Power-On Elapsed Digital Timer: Indicates the accumulated time the system is running.
•
Power-Off Delay Digital Timer: Indicates the length of time left for delay off function.
•
Power-Off Delay Timer Indicator: Lights up when auto-shutdown delay timer function is on.
•
Controls:
•
Automatic cleaning reminder:
•
This range hood is equipped with a cleaning reminder that will activate following 30 hours of use.
•
When blower (motor) starts to rotate, cumulative running time will be shown in
Power-On Elapsed
Digital Timer
. This timer icon flashes when 30 hours is up and reminds user to clean the aluminum
filter.
After cleaning the filter and when the motor is not in use, press and hold
•
Increase Value
button over 3
seconds to reset the timer. Please note that turning off the system will not reset the
Power-On Elapsed
Digital Timer
.
Adjusting the blower (motor) speed:
•
Press
•
Power
button once to turn on the system. The
Blower Power Indicator
icon flashes showing that
the blower (motor) is ready.
Decrease Value
button will decrease the speed of the blower (motor) from
6 to 1 (strongest to quietest).
Increase Value
button will increase the speed of the blower (motor) from
1 to 6 (quietest to strongest).
Press
•
Power
button once to turn off the system.
Note: The system saves user configurations, settings such as light, timer and blower (motor) speed will re
-
main the same the next time it is turned on.
Summary of Contents for 218 Series
Page 2: ......
Page 18: ...Page 16 Wiring Diagram Six Speed with Type GU10 Bulb Six Speed with Type MR16 Bulb ...
Page 22: ...Your Notes Page 20 ...
Page 23: ...Your Notes Page 21 ...
