Page 13
Power
Decrease Value
Control Panel Layout and Buttons Configurations:
Light
Increase Value
Blower Power Indicator
Blower Speed Indicator
Power-On Elapsed Digital Timer
Power-Off Delay Digital Timer
Power-Off Delay Timer Indicator
Light Power Indicator
Controls:
•
Adjusting the timer function:
•
While the blower (motor) is not running, press and hold
•
Decrease Value
button over 3 seconds to
enter timer mode. Adjust to desired period of delay off timer by pressing
Increase Value
or
Decrease
Value
button (minimum 1 minute to maximum 15 minutes). This setting will be saved immediately.
Activating the timer function:
•
While the blower (motor) is running, press and hold
•
Power
button for over 3 seconds to activate
delay off timer. Power-off delay indicator will lit up and power-off delay digital timer will begin to
countdown, when it reaches zero, the blower (motor) will shut down.
Adjusting the light:
•
Press
•
Light
button once to turn on the lights, and once again to turn off the lights.
While the lights are off, press and hold
•
Light
button for over 3 seconds to dim the lights from low to
high. Level of brightness will be stored in system’s memory.
Note: Light settings are independent from other settings (including power-off delay) and lights has to be
manually turned on or off.
Note: The system saves user configurations, hence settings such as light, timer and blower (motor) speed
will remain the same the next time it is turned on.
Range Hood Operations
(Continued)
Summary of Contents for 218 Series
Page 23: ...Your Notes Page 22 ...
