Cavalry CAND Series, Installation Manual

10

Web-based GUI 

1. 

The NAS configuration GUI can be accessed by typing the following into any web 

browser.

http://cavalry/login.cgi   or   192.168.1.1

2. 

When prompted, enter:

Username: admin

Password: admin 

3. 

Select the desired file system and RAID configuration from the GUI. (The recom-

mended settings is 

File System: EXT3

Configuration: RAID 1

4. 

Click “Create RAID System”

5. 

Formatting will take some time depending on the capacity of the hard drives. 

Wait until the process has completed and make sure not to power off the unit.

6. 

The system will automatically restart once the process has been completed.

7. 

Upson seeing the login page, enter the username and password again. 

8. 

Select 

Control Panel 

at the top of the page. 

9. 

Select Maintenance from the menu on the left side of the screen.

10.  Select RAID Settings to see the status of the finished array.

11.  Power off theunit by holding down the power button for a few seconds until it 

shuts down.

12.  Refer to the CAND Series User’s Guide for complete instructions on operating the 

unit. The guide can be found on www.cavalrystorage.com