OPERATING YOUR WINE CELLAR
It is recommended you install the Wine Cellar in a place where the ambient temperature is between
23º-26ºC/ 72º-78ºF. If the ambient temperature is above or below recommended temperatures, the
performance of the unit may be affected. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate. The range of 5
º-18ºC
/40º-65ºF may not be
reached.
RECOMMENDED TEMPERATURE SETTINGS
Conservation
10 ~ 14ºC
49 ~ 57ºF
Red Wines
15 ~ 18ºC
58 ~ 65ºF
Dry/White Wines
9 ~ 14ºC
48 ~ 57ºF
Rose Wines 10 ~ 11ºC
49 ~ 51ºF
Sparkling Wines 5 ~ 8ºC
40 ~ 47ºF
ON/OFF POWER
To turn OFF the appliance, press the ON/OFF button.
SETTING THE TEMPERATURE CONTROL
•
You can set the temperature as you desire by pushing the
UP
or
DOWN
button. When you push
the two buttons for the first time, the LED readout will show the original temperature set at
previous time (the temperature preset at the factory is 54ºF).
•
The temperature that you desire to set will increase 1ºF or 1ºC if you push the
UP
button once, on
the contrary the temperature will decrease 1ºF or 1ºC if you push the
DOWN
button once.
•
When you store mostly red wines, the temperature which you control by pushing the above two
buttons need to be set at between 58 to 65
°
F and the LED lamp under “RED” will be lit red.
•
When you store mostly white wines, the temperature needs to be set at between 48 to 57
°
F and
the LED lamp under “WHITE” will be lit green.
•
When you store mostly sparkling wines, the temperature needs to be set at between 40 to 47
°
F
and the LED lamp under “SPARKL” will be lit amber.
•
You can select temperature display setting from Fahrenheit to Celsius degree by pushing the
UP
and
DOWN
button at the same time for 5 seconds. Fahrenheit and Celsius degrees indicator will
appear in green color in the “SET” window.
•
The temperature inside the unit will be appearing in red color in the “DISPLAY” window.
NOTE:
•
If the unit is unplugged, power lost, or turned off; you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the Wine Chiller will not start.
•
When you use the wine chiller for the first time or restart the wine chiller after having been shut off
for a long time, there could be a few degrees variance between the temperature you select and
the one indicated on the LED readout. This is normal and it is due to the length of the activation
time. Once the wine chiller is running for a few hours everything will be back to normal.
STORAGE
Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able
to store may vary.
NOTE:
You can place 54 standard bottles in the wine cellar.
25
