- 9 -
FUNCTIONAL INSTRUCTIONS FOR CONTROL PANEL
Power:
This button controls starting and stopping of the whole cooling system. (indicates the
situation of power supply)
°C/°F:
This button can switch Fahrenheit to Celsius and vice versa, their temperature indications
are corresponding. When switching between Celsius and Fahrenheit, the corresponding
indicator on the right corner of the LED will start, and user can also choose the procedure of
memorizing Fahrenheit when starting operation.
Attention:
You can switch temperature display at will by pressing the button: “
°C/°F”
for 3 seconds.
:
Operate this button to control turn on/off LED lighting inside the cabinet.
▲/▼(+/-):
This button controls progressive increase or decrease of temperature. When temperature
range is between 5-8°C (40-47°F), orange lighting will indicate on the below corresponding
indicator, while the range between 9-14°C (48-57°F), white lighting will indicate on the below
corresponding indicator.
RUN:
Only when the compressor is working, the below corresponding LED indicator will be lit up.
The operational status of the compressor can be judged from lighting/stopping of the
indicator.
SET CHAMBER:
Digital display of temperature setting.
CHAMBER:
Digital display of temperature inside the cabinet.
Control requirement for cooling circulation system:
When cooling system inside the cabinet meet the setting of the temperature, the compressor
will stop working. When temperature inside the cabinet rises up to the level which requires
compressor to start, it’ll enter the process of re-starting, ≥ 5 minutes is required each time for
stopping of the compressor. If operating the button POWER to control cooling system of the
whole cabinet, 5 minutes interval for delay protection is required to re-start the compressor.
