OPERATION
The CaviBlaster
®
1325-D should be operated by two (2) properly trained individuals.
One, the diver, operates the zero-thrust gun, while the other operates the power unit.
Both operators should be in audio or visual communication with each other.
The CaviBlaster® 1325-D should only be operated
by properly trained personnel who are familiar with
the contents of the manual. Review the safety
requirements found in Section 3 before operating.
Preparing the CaviBlaster
®
for Operation
The following checklist should be completed in advance, so that the unit is always ready
for immediate use. This should be completed after each use.
1) Inspect the CaviBlaster
®
power unit, hoses, fittings and gun for any signs of damage.
2) Inspect the inline strainer to ensure that it is not clogged (See Figure 6.1). Clean if
necessary.
3) Check for proper engine oil level (See engine Owner’s Manual found in the
Appendix
). Add lubricating oil (SAE 10W40) if necessary.
4) Check for proper pressure pump oil level (See pump Owner’s Manual found in the
Appendix
). Add hydraulic oil (SAE 30 non-detergent) if necessary.
5) Check fuel tank (See Figure 2.1) for proper diesel fuel level. Add diesel fuel (ASTM
Grade No. 1-D or 2-D, or EN 590) if necessary.
Incorrect fuels should not be used as they may
prove hazardous.
Page - 22
CaviBlaster 1325-D Operations Manual
For More information please email sales@cavidyne.com or call 1-(352)275-5319
