6.
Install shims and strike.
Note: Strike opening is offset and reversible for best fit.
Key Locking:
Install strike.
7.
Important: set barn door rail stop.
Close door and adjust stop.
Track stop must be set to hit roller before door makes
contact with the strike. The amount varies with each
manufacturer and should be thoroughly tested.
5
5
5
5
5
5.
Install cap
.
Tighten set screw into divot in the back of the base.
(Use 3/32” hex wrench)
Note: installation of the shims and strikes completes
the assemble/retention of the cap.
Set screw
goes here
5
Tighten
here
Cap shown installed
without strikes and shims
5
5
5
5
2
PAGE
Drawings are not to scale.
© Cavity Sliders USA Inc. CAVILOCK
®
BARN DOOR STRIKE
®
(O.D. 2018) 61336 - 02.2019
All copyright and other property in this document is reserved by
Cavity Sliders
USA Inc
. Details and specifications are subject to change without notice. Whilst
all care is taken to ensure the accuracy of all information, no responsibility will
be accepted for any errors or omissions. ® CAVILOCK is a Registered Trademark.
Patents pending.
548 Finney Ct
Gardena
CA 90248
T
(888) 466 0030
F
(310) 769 5824
www.
cavitysliders.com
Installation (continued)
Passage/ Privacy:
Install shim and strike.
Strike is offset and reversible
