7–VMware Driver Software
Driver Parameters
64
83840-546-00 N
qfle3f_debug_level
The
qfle_3f_debug_level
parameter enables additional messaging from the
driver. Set to
0
(default) to disable additional messaging. Set to
1
to enable
additional messaging.
qfle3f_devloss_tmo
The
qfle3f_devloss_tmo
parameter sets the remote LUN device loss
time-out value (in seconds). The default is
20
seconds. Valid values are in the
range of
1–120
seconds.
qfle3f_max_luns
The
qfle3f_max_luns
parameter adjusts the maximum number of LUNs
supported by the driver. The default value is
FFFFh
(65,535 LUNs).
qfle3f_queue_depth
The
qfle3f_queue_depth
parameter adjusts the maximum queue depth per
LUN. By default, the OS settings are used.
qfle3f_enable_r_a_tov
The
qfle3f_enable_r_a_tov
parameter enables or disables a user-defined
R_A_TOV. Set to
0
to disable R_A_TOV. Set to
1
(default) to enable R_A_TOV.
qfle3f_r_a_tov
When the
qfle3f_enable_r_a_tov
parameter is set to
1
, the
qfle3f_r_a_tov
parameter sets the value of a user-defined R_A_TOV. The
default value is
10
.
qfle3f_autodiscovery
The
qfle3f_autodiscovery
parameter controls auto-FCoE discovery during
system boot. Set to
0
(default) to disable auto-FCoE discovery. Set to
1
to
enable auto-FCoE discovery.
qfle3f_create vmkMgmt_Entry
The
qfle3f_createvmkMgmt_Entry
parameter creates the vmkMgmt
interface. Set to
0
if the vmkMgmt interface will not be used. Set to
1
(default)
to create the vmkMgmt interface.
