9–Configuring iSCSI Protocol
iSCSI Boot
108
83840-546-00 N
3.
On the
Main Menu
, select
MBA Configuration
(
), and then
press ENTER.
Figure 9-10. Configuring VLANs—Multiboot Agent Configuration
4.
On the
MBA Configuration Menu
), press the UP ARROW or
DOWN ARROW key to select each of following parameters.
VLAN Mode
: Press ENTER to change the value to
Enabled
.
VLAN ID
: Press ENTER to open the VLAN ID dialog box, type the
target VLAN ID (1–4096), and then press ENTER.
Figure 9-11. Configuring iSCSI Boot VLAN
5.
Press ESC once to return to the
Main Menu
, and a second time to exit and
save the configuration.
6.
Select
Exit and Save Configurations
to save the VLAN for iSCSI boot
configuration (
). Otherwise, select
Exit and Discard
Configuration
. Press ENTER.
Figure 9-12. Saving the iSCSI Boot VLAN Configuration
