9–Configuring iSCSI Protocol
iSCSI Offload in Windows Server
121
83840-546-00 N
b.
Click the
Targets
tab (
), and then on the Targets page,
select the target. Click
Log On
to log into your iSCSI target using the
Cavium iSCSI adapter.
Figure 9-21. Logging on to the iSCSI Target
c.
In the Log On to Target dialog box (
), click
Advanced
.
Figure 9-22. Log On to Target Dialog Box
d.
In the iSCSI Initiator Properties, General page, select
QLogic 10
Gigabit Ethernet iSCSI Adapter
for the local adapter, and then click
OK
to close Advanced settings.
