7–iSCSI Configuration
Configuring iSCSI Boot
86
AH0054602-00 A
13. Press ESC once, and a second time to exit.
14. Click
Yes
to save changes, or follow the OEM guidelines to save the
device-level configuration. For example, click
Yes
to confirm setting change
(
).
Figure 7-14. Dell System Setup: Saving iSCSI Changes
15. After all changes have been made, reboot the system to apply the changes
to the adapter’s running configuration.
Dynamic iSCSI Boot Configuration
In a dynamic configuration, ensure that the system’s IP address and target (or
initiator) information are provided by a DHCP server (see IPv4 and IPv6
configurations in
“Configuring the DHCP Server to Support iSCSI Boot” on
).
Any settings on the following parameters are ignored and do not need to be
cleared (with the exception of the initiator iSCSI name for IPv4, CHAP ID, and
CHAP secret for IPv6):
Initiator Parameters
First Target Parameters or Second Target Parameters
