8–FCoE Configuration
FCoE Boot from SAN
115
AH0054602-00 A
LUN Busy Retry Count
: Default value or as required
Figure 8-5. Dell System Setup: FCoE General Parameters
4.
Return to the FCoE Configuration page.
5.
Press ESC, and then select
FCoE Target Parameters
.
6.
Press ENTER.
7.
In the FCoE Target Parameters Menu, enable
Connect
to the preferred
FCoE target.
8.
Type values for the following parameters (
) for the iSCSI target,
and then press ENTER:
World Wide Port Name Target
n
Boot LUN
n
Where the value of
n
is between 1 and 8, enabling you to configure 8
FCoE targets.
