12–Windows Server 2016
Configuring VMMQ
172
AH0054602-00 A
NetDirect 445 4
RemoteTrafficClasses : TC TSA Bandwidth Priorities
-- --- --------- ----------
0 ETS 5% 0-3,5-7
1 ETS 95% 4
RemoteFlowControl : Priority 4 Enabled
RemoteClassifications : Protocol Port/Type Priority
-------- --------- --------
NetDirect 445 4
Configuring VMMQ
VMMQ configuration information includes:
Setting the VMMQ Max QPs Default and Non-Default VPort
Creating a Virtual Machine Switch with or Without SRIOV
Enabling VMMQ on the Virtual Machine Switch
Getting the Virtual Machine Switch Capability
Creating a Virtual Machine and Enabling VMMQ on VMNetworkadapters in
the Virtual Machine
Default and Maximum VMMQ Virtual NIC
Enabling and Disabling VMMQ on a Management NIC
NOTE
The preceding example is taken when the adapter port is connected to an
Arista 7060X switch. In this example, the switch PFC is enabled on
Priority 4. RoCE App TLVs are defined. The two traffic classes are defined
as TC0 and TC1, where TC1 is defined for RoCE.
DCBX Protocol
mode is
set to
CEE
. For Arista switch configuration, refer to
“. When the adapter is in
Willing
mode, it accepts
Remote Configuration and shows it as
Operational Parameters
.
NOTE
QoS is also applicable for WS2012 and WS2012R2.
