4–Upgrading the Firmware
Running the DUP Using the .bin File
36
AH0054602-00 A
shows the options that you can use to customize the Dell Update
Package installation.
Figure 4-5. DUP Command Line Options
Running the DUP Using the .bin File
The following procedure is supported only on Linux OS.
To update the DUP using the .bin file:
1.
Copy the
Network_Firmware_NJCX1_LN_X.Y.Z.BIN
file to the system
under test (SUT).
2.
Change the file type into an executable file as follows:
chmod 777 Network_Firmware_NJCX1_LN_X.Y.Z.BIN
3.
To start the update process, issue the following command:
./Network_Firmware_NJCX1_LN_X.Y.Z.BIN
4.
After the firmware is updated, reboot the system.
