6–RoCE Configuration
Configuring RoCE on the Adapter for Windows Server
59
AH0054602-00 A
shows an example of configuring a property value.
Figure 6-1. Configuring RoCE Properties
3.
Verify that RoCE is enabled on the adapter using Windows PowerShell
®
.
The
Get-NetAdapterRdma
command lists the adapters that support
RDMA—both ports are enabled.
PS C:\Users\Administrator>
Get-NetAdapterRdma
Name InterfaceDescription Enabled
----- -------------------- -------
SLOT 4 3 Port 1 QLogic FastLinQ QL45212... True
SLOT 4 3 Port 2 QLogic FastLinQ QL45212... True
NOTE
If you are configuring RoCE over Hyper-V, do not assign a VLAN ID to
the physical interface.
