11–SR-IOV Configuration
Configuring SR-IOV on Linux
177
AH0054601-00 B
Figure 11-6. Windows PowerShell Command: Get-NetadapterSriovVf
Configuring SR-IOV on Linux
To configure SR-IOV on Linux:
1.
Access the server BIOS System Setup, and then click
System BIOS
Settings
.
2.
On the System BIOS Settings page, click
Integrated Devices
.
3.
On the System Integrated Devices page:
a.
Set the
SR-IOV Global Enable
option to
Enabled
.
b.
Click
Back
.
4.
On the System BIOS Settings page, click
Processor Settings
.
5.
On the Processor Settings page:
a.
Set the
Virtualization Technology
option to
Enabled
.
b.
Click
Back
.
6.
On the System Setup page, select Device Settings.
7.
On the Device Settings page, select
Port 1
for the QLogic adapter.
8.
On the Device Level Configuration page (
a.
Set the
Virtualization Mode
to
SR-IOV
.
b.
Click
Back
.
Figure 11-7. Integrated Devices
