2–Hardware Installation
Safety Precautions
9
AH0054601-00 B
Safety Precautions
Preinstallation Checklist
Before installing the adapter, complete the following:
1.
Verify that your system meets the hardware and software requirements
listed under
“System Requirements” on page 8
.
2.
Verify that your system is using the latest BIOS.
3.
If your system is active, shut it down.
4.
When system shutdown is complete, turn off the power and unplug the
power cord.
NOTE
denotes minimum host OS requirements. For a complete list of
supported operating systems, visit the QLogic Downloads and
Documentation page:
!
WARNING
The adapter is being installed in a system that operates with voltages that
can be lethal. Before you open the case of your system, observe the
following precautions to protect yourself and to prevent damage to the
system components.
Remove any metallic objects or jewelry from your hands and wrists.
Make sure to use only insulated or nonconducting tools.
Verify that the system is powered OFF and is unplugged before you
touch internal components.
Install or remove adapters in a static-free environment. The use of a
properly grounded wrist strap or other personal antistatic devices and an
antistatic mat is strongly recommended.
NOTE
If you acquired the adapter software from the QLogic Web site
(
), verify the path to the adapter driver
files.
