Call +44 (0)33 0380 1329 or visit
lumi-plugin.com for more information
5 Year
Warranty
5
50,000
Hours
16V
CE Mark
Beam Angle
is 60°
Fire Rated
30/60/90
Dimmable
700
Lumens
Driver
Included
Developed by CAVIUS Aps for Sleep Safe Systems Limited
T/A Lumi-Plugin - Lindenmuth House, 37 Lindenmuth Way, Greenham Business Park, Newbury, Berkshire, RG19 6HW
Manufactured in P.R.C.
In normal mode the LED will flash every 48 seconds to show
correct operation.
The green LED is on when the alarm is connected to mains power.
It may take up to 1 minute to indicate that mains power has been
connected.
When the heat is detected, the heat alarm will go into ‘Alarm
Mode’. It will sound the alarm signal and the red LED will flash.
The heat alarm will also transmit the alarm signal to the other
connected alarms, which will also sound the alarm signal after
a short delay.
The CAVIUS Wireless Family have two different alarm signals:
Alarm Signal 1 --- --- --- is a life threatening alarm, like a smoke
alarm.
Alarm Signal 2 - - - is a non-life-threatening alarm, like
a flooding alarm:
Smoke alarm signal: --- --- ---
Heat alarm signal: --- --- ---
Flood alarm signal: - - -
CO alarm low level signal: - - -
CO alarm high level signal: --- --- ---
Please note: Only the originating alarm’s red LED will flash,
so it can be identified.
If the heat alarms are to set into a false alarm by cooking,
fireplace, etc. they can be paused for 10 minutes by pressing the
test button on the originating heat alarm only (indicated by the
flashing LED).
The reason for this is that it is necessary to locate the source of
the alarm before using the hush function. This is to make sure
that it is not a life threatening situation.
Your product has a battery back-up with a 1 year life in battery
mode without mains power, and up to 10 years normal life with
mains. However, we recommend to replace the battery every 5
years.
When the battery is starting its end of life, a short beep will
sound out every 48 seconds for 30 days.
The heat alarm should be vacuum cleaned once per quarter, to
remove dust particles, and it can be wiped with a damp cloth.
(Do not open the alarm).
Please note: You can easily vacuum clean the heat chamber
through the dedicated openings in the top cover, and it’s possible
to test the alarms by pressing the cover at the same time.
High humidity condensing which can be resolved by drying the
heat alarm.
If the heat alarm does not work when the test button is pushed,
the probable cause is a power failure. Always test the alarm after
replacement of battery.
• This luminaire is guaranteed for a period of 5 years
or 50,000 hours - depending which comes first.
• The heat alarm is guaranteed for a period of 2 years.
• The guarantee period is invalid if the product has been
tampered with; if any of the product labels, manufacturing
labels, rating labels or serial labels have been removed; or
the product has not been installed in accordance with
local wiring regulations.
• If the product fails within the guaranteed period, Sleep Safe
Systems Limited T/A Lumi-Plugin will replace the product free
of charge but take no responsibility for installation, operation
or maintenance costs.
• Lumi-Plugin reserves the right to change the product
specification without notice.
