background image

CAUTION

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

The  lightning  flash  with  arrowhead  symbol  within  an 
equilateral  triangle  is  intended  to  alert  the  user  to  the 
presence  of  uninsulated  dangerous  voltage  within  the 
product's enclosure, that may be of sufficient magnitude 
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is 
intended to alert the user to the presence of important 
operation and maintenace (servicing) instruction in the 
literature accompanying the appliance.

CAUTION

: TO REDUCE THE RISK OF ELECTRIC 

SHOCK DO NOT REMOVE COVER ( OR BACK) 

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED PERSONNEL

1.  Please read all the safety instruction before using the product.

2.  This product must be earthed. If it should be malfunction or break down, grounding provides a path of least resistance  for electric 

     current to reduce risk of electric shock.

     This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged 

     into an appropriate outlet that is properly installed and earthed in accordance with all local codes and ordinance.

   

     DANGER- Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified 

     electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with 

     the product - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

3.  To reduce the risk of injury, close supervision is necessary when the product is used near children.

4.  Do not use this product near water-for example, near a bathtub, washbowl, kitchen sink, in wet basement or near a swimming 

      pool or the lake.

5.  This product may be capable of producing sound levels that cloud cause permanent hearing loss. Do not operate for a long 

      period of time at high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, 

      you should consult an audiologist.

6.  This product should be located so that its location or position does not interfere with its proper ventilation.

7.  This product should be located away from heat sources such as radiators, heat registers or other products that produce heat. 

8.  The product should be connected to a power supply only of the type described on the operation instructions or as marked on 

      the product.

9.   This product may be equipped with a polarized line plug (one blade wider than the other). This is a safety feature. If  you  are 

      unable to insert the plug into the outlet, contact an electrician to replace your obsolete outlet. Do not defeat the safety purpose 

      of the plug.

10. The power-supply cord of the product should be unplugged from the outlet when left unused for a long period of time.  

      When unplugging the power-supply cord, do not pull on the cord, but grasp it by the plug.

11. Care should be taken so that object do not fall and liquid are not spilled into the enclosure through opening. 

12. The product should be serviced by qualified service personnel when:

     

 

A. The power-supply cord or the plug has been damaged; or

      B. Objects have been fallen, or liquid has been spilled into the product; or

      C. The product has been exposed to rain; or

      D. The product does not appear to operate normally or exhibits a marked change in performance; or

      E. The product has been dropped or the enclosure damaged..

13. Do not attempt to service the product beyond that described in the user-maintenance instructions. 

       All other servicing should be referred to qualified service personnel.

14. WARNING- Do not place objects on the product's power cord or place it in a position where anyone could trip over, walk 

      on or roll anything over it. Do not allow the product to rest on or to be installed over power cords of any type. Improper 

      installations of this type create the possibility of fire hazard and/or personal injury.

                     

                                  

    IMPORTANT SAFETY INSTRUCTIO

SAVE THESE INSTRUCTIONS

Please see below basic protection proceeding before using:

2

Summary of Contents for DK3




























Reviews: