CAVS USA INC
such access, you can impose a variety of restrictions on the buttons as shown
below.
Using the password, enter the <<SYSTEM CONTROL>> screen. (For Type II, use
the Remote Control.) Press 6 to select “Button Control”. A new screen
<<BUTTON CONTROL>> will appear on the TV monitor.
5.1 Selection 1 sets the following buttons to “Enable” or “Disable”:
DISC CHANGE, POWER, OPEN/CLOSE
Press 1 and use the LineDn and LineUp buttons to select Enable / Disable.
WARNING
: It is strongly recommended to set Selection 1 as “Disable” at
all times.
5.2 Selection 2 (Button set#01) sets the following buttons to “Enable” or
“Disable”:
DISC1, DISC2, DISC3, JB/CD, INTRO, RESUM, MENU, SETUP, PBC,
PREV, NEXT, SLOW, RETURN, SELECT, PPGM, PAUSE, BGV,
RETURN, RANDOM, REPEAT, FANFARE, PPGM.
Press 2 and use the LineDn and LineUp buttons to select Enable / Disable.
WARNING
: It is strongly recommended to set the Selection 2 as “Disable”
when operating with the bill acceptor.
5.3 Selection 4 (Button set#03) sets the following button to “Enable” or
“Disable”:
STOP (/RETURN)
Press 4 and use the LineDn and LineUp buttons to select Enable / Disable.
Following table describes the resulting controls of the Stop button.
10
