P2PE Instruction Manual for PCI P2PE v3.0
Version 1.6.2 – 3rd September 2020
© 2020 Cayan LLC
Page 49
8.1 Instructions for troubleshooting a POI device
8.1.3 Removing and replacing the battery of a Genius Handheld device
If you need to remove and replace the battery of your Genius Handheld device, complete the
following steps:
1.
Remove the rear battery cover by sliding it down until you hear a click, then lifting it off.
2.
Place your finger in the groove at the base of the battery housing and remove the
battery.
3.
Insert the battery by aligning the three gold contacts on the top of the battery with the
contacts in the device. Press down on the battery until you hear a click.