3
Fit the front and rear drumheads. Adjust
each one of the tension rods with the key
until all wrinkles are gone.
Step 1
Insert the mounting rod into the tom drum
mounting located on the bass drum and
secure it with wing nut. Slide the tom drum
onto the mounting rod and secure it. Install
snare drum in the same way.
Insert the beater into the bass drum pedal
and secure it with oval nut. Insert the bass
drum legs into the mountings and adjust
the height so that the bass drum is level,
then secure the legs with the wing nuts.
Step 2
Step 3
Note:When you tighten the screw under the way of clockwise,the
snare will be closed to the drum head, and it will sound “zizi”, which
is different from Tom drum.as right pic, the screw close to the bottom
drumhead.
Remark:Do not adjust the tom drum and
snare drum into the same direction.
Drum pedal
screw
Tension rod
Washer
Hoop
Drumhead
Shell
Drumhead
Tension rod
Hoop
Washer
Assembly Instructions
Tom drum holder
Tom drum
Bass drum legs
Drum key
