Overview & Part Numbers
Countertop Intallation
Countertop Kit (CBK2) Required
Item #
1
2
3
4
5
6
7
8
9
Part #
MC6600ASBL
011-50-3011
MC273
MC253
CBTAs
MC351S
MCB880R
MC240N
MC700
Part Description
Hose and Diverter Valve
Housing top
Black rubber cushion (inside housing top)
V-band with knob
Carbon Block Filter cartridge
O-ring
Housing bottom
Short acrylic base
Standard adapters (see page 7)
16
2.
Use the included screws and a Phillips-head screwdriver to fasten
the mounting bracket to the wall, ensuring it is oriented in an upright
position. The bracket is in an upright position when the larger holes on
each flat mounting plate on the sides of the bracket are at the bottom.
3.
Attach the system to the bracket:
a.
Insert the system housing into the two metal bands so that the
metal bands wrap around the top half of the housing, above the
V-Band. The top half of the system housing has the Inlet and Outlet
adapters.
b.
Tighten the connector screws on the metal bands to securely hold
the system housing to the mounting bracket. Wiggle the housing to
make sure it does not shift in the metal bands, and/or tighten the
metal bands appropriately.
Summary of Contents for CB-As
Page 23: ...Notes...
