VRC2100 Vending Reader
12
Installation Guide
VRC2100 Surface Mount Vending Reader – Configuration Buttons
Press and hold
SEL
for 3 seconds to start the configuration session. The
display will show
Configuring...
for 2 seconds and will then display the
first menu item.
If, at any point, you want to stop the configuration process, stop pushing
the buttons. The configuration will time out automatically saving any
changed settings and leaving any unchanged settings intact. For example,
if you only want to change the
Master/Slave
setting, change that setting
and then stop pushing the buttons for 60 seconds. The display will show
Exiting...
and return to normal operation, saving the
Master/Slave
setting.
Alternatively, just hold down
SEL
as it scrolls through the rest of the
settings until it reaches the display
Saving and Exiting
and then let go of
all buttons.
SEL
scrolls through the menu items.
CHG
changes the setting for that
menu item. When you reach the menu item that you want to change, press
CHG
to advance the menu item through all possible settings. When you
reach the setting you want, let go of
CHG
. Push
SEL
to go to the next
menu item.
Settings are stored in flash memory. Functional changes are saved
immediately upon changing a setting.
