VRC2100 Vending Reader
4
Installation Guide
For CS Gold installations employing the VRC2100 multi-drop
feature to conserve IP addresses, route and connect the RS422 multi-
drop cables as described in section 3.6 (
Controller Configuration
).
6.
Confirm that all cables are secure and safely routed and then apply
power to the vending machine.
7.
Configure the VRC2100 network port as described in section 3.3
(
Network Configuration
).
8.
Configure the VRC2100 controller as described in section 3.6
(
Controller Configuration
).
9.
Configure the Host as described in the
CS Gold Server Guide
.
10.
Test for proper operation by swiping a valid card and selecting an
item.
11.
Close and lock the vending machine door.
Alternatively, the VRC2100 can be configured with the reader outside of
the vending machine using the External Power Supply (part number
VND6740086).
3.2 Install the VRC2100 Surface Mount Vending Reader
Use the following procedure to install the VRC2100 Surface Mount
Vending Reader:
1.
Remove power from the vending machine.
2.
Select the reader mounting location on the front of the vending
machine with clearance behind.
