RRS-4 Technical Manual 7/20/2011
6.1.4 Breaker Test/ No Test Position Configurations
Once selecting a breaker under Breaker Select (for example purposes, GE 1200 has been
selected), the operator will be navigated to a screen displaying the chosen breaker and
the option to make modifications to the information specific to the Test or No Test
position.
To edit or enter data for the unit operating the breaker in the Test position, ensure
'Test' is highlighted then press "Configure". For example purposes, the Test position has
been selected.
1.
Test
– When pressed, the Test button highlights the Test Selection Indicator (as
shown in Figure 25 for example) allowing configurations in the Test position
2.
No Test
– When pressed, the No Test button highlights the No Test Selection
Indicator allowing configurations in the No Test position
3.
Main Type 1
– Breaker name 1 from list of all breaker names
4.
Test/No Test Selection Indicators
– The two indicators shown in Figure 25 allow
the operator a quick and easy way of knowing which of the Test and No Test
options are selected; In Figure 25, the Test indicator is highlighted signaling that
the Test operation is selected
5.
GE 1200
– The name of the selected breaker is displayed here; in Figure 25, the
selected breaker for data modifications is GE 1200
Figure 25: Breaker Test/ No Test position configurations
1.
2.
6.
3.
5.
4.
