RSA-145E Manual – ABB/Sace Isomax S7 (OTM Mechanism)
Page | 3
Step 4:
With the handle operator slide forks sitting around the handle and the RSA flush against
the breaker, tighten the two thumb screws on the bottom locator to secure the RSA to the
breaker. NOTE: Do not over tighten or the RSA may try to come off of the breaker during
operation.
Step 5:
Mount the motor control box in a location that does not interfere with operation but
lets the user access the cable receptacle on the box.
Step 6:
Lastly, ensure that the device is setup as shown below. If everything is setup as
described above and shown below then the RSA-145E is ready to operate.
