17
10
11
See the data plate on the bottom of the machine
Max . 15 bar
< 70 dB A
approx. 4 kg
1 litre
10 °C - 40 °C
162 mm
283 mm
370 mm
Troubleshooting
Technical data
Problem
Cause / Solution
No beverage is brewed
when beverage buttons are pressed.
The water tank is empty (the 'No Water' indicator light is on and red).
³
Fill the tank with filtered/bottled water.
Press the desired beverage button.
The machine will resume brewing.
The beverage is not hot enough.
Cold cups / mugs. Scale build-up in machine.
³
Preheat the cup.
If doesn't solve, descale the machine.
The lever cannot be lowered.
The used capsule drawer is full. Capsule stuck inside the machine.
³
Empty the used capsule drawer.
Remove the used capsule.
Indicator light is lit steadily in RED.
Heating problems.
³
Turn off the machine, then turn it back on. If the problem persists, take the machine
to an Authorized Service Center
.
Coffee is dispensing very slowly and is
of poor quality.
Brewed Coffee/Tea button was used with an espresso capsule.
³
Lift lever to eject capsule into used capsule drawer, insert new espresso capsule,
and use Espresso or Long Espresso/Tea Latte button.
Beyond the recommended cleaning and maintenance procedures, the CBTL™ Machine is not user serviceable. For additional options,
please refer to the CBTL™ Limited Warranty (p.18).
13CBV_BB_ManualS07_PH.r1a.indd 17
7/30/13 5:33 PM
